ENGINEERING GRAPHICS BE110 MODULE 1 KTU B TECH QUESTIONS FOR FIRST YEAR [S1-S2] STUDENTS | QUESTION BANK | IMPORTANT QUESTIONS [I]


APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY

ENGINEERING GRAPHICS BE110  KTU B TECH QUESTIONS FOR FIRST YEAR [S1-S2] STUDENTS | QUESTION BANK | IMPORTANT QUESTIONS, graphics notes ,graphics notes s1s2,graphics notes,graphics ktu questions,graphics ktu,graphics questions,graphics questions,electronics graphics questions ktu,ktu,ktugraphics questions,ktu s1 questions,s1questions,first year questions,ktu s2 questions,s2 questions

MODULE-1

Line Parallel to both the Planes

1. Draw the projections of line AB of length 60mm, parallel to both the planes and with end A, 30mm above HP and 20 mm in front of VP.

2. Draw the projections of line AB of length 60mm, parallel to both the planes and with end A, 30mm above HP and 20 mm behind VP.

3. Draw the projections of line AB of length 60mm, parallel to both the planes and with end A, 30mm below HP and 20 mm behind VP.

4. Draw the projections of line AB of length 60mm, parallel to both the planes and with end A, 30mm below HP and 20 mm in front of VP.

Line parallel to one plane and inclined to other

5. Draw the projections of line AB of length 50mm, parallel to VP and inclined at 350 with HP. Point A is 40mm above HP and 50 mm in front of VP.

6. Draw the projections of line AB of length 50mm, parallel to HP and inclined at 450 with VP. Point A is 40mm above HP and 50 mm in front of VP.

7. The front view of a 75mm long line measures 55 mm. The line is parallel to HP and one of its ends in VP and 25 mm below HP. Draw the projections of the line and determines its
inclination with VP.

8. The end C of a line CD of length 90 mm, is 15mm in front of VP and 35mm below HP. The end D is also 35mm below HP, but 40mm behind VP. 

Draw the projections of the line CD,mark the traces. At what distance from the end C the line CD penetrates VP.

9. A line AB 80mm long is parallel to HP and inclined to VP. The end A is 40mm above HP and 25mm in front of VP. The end B is 30mm behind VP. 

Draw its projections. What is the inclination of the line CD with VP? Also mark the traces.

10. A line PQ is parallel to VP its front view is 70mm long and makes an angle of 300 with the XY line. The midpoint of the front vie is on XY line. If the line is 20mm behind VP. Draw
its projections.

Line parallel to one plane and perpendicular to other plane

11. Length of the line AB is 60mm and perpendicular to HP. A is 50 mm below HP and 40mm behind VP. Draw the projections if B is in (a) 3rd quadrant (b) 2nd quadrant.

12. Length of the line AB is 60mm and perpendicular to VP. A is 50 mm above HP and 20mm in front of VP. Draw the projections if B is in (a) 1st quadrant (b) 2nd quadrant.

Line inclined to both HP and VP

13. A line PQ 60mm long has its end P 20mm above Hp and 30mm in front of VP. If the line is inclined at 300 HP and 450 to VP. Draw its projection and mark its traces.

14. A line AB measuring 70mm has its end A 15mm in front of VP 20mm above HP and other end B is 60mm in front of VP and 50mm above HP. Draw the projections of the line, Mark its traces and also find the inclination with HP and VP.

15. A straight line AB 65mm long has its end A 15mm in front of VP and 40mm above HP while the other end B is 30mm in front of VP and 20mm above HP. Draw its projections.

CLICK HERE FOR MORE GRAPHICS QUESTIONS

1 comment:

Powered by Blogger.