# ENGINEERING GRAPHICS BE110 MODULE 1 KTU B TECH QUESTIONS FOR FIRST YEAR [S1-S2] STUDENTS | QUESTION BANK | IMPORTANT QUESTIONS [III]

APJ ABDUL KALAM TECHNOLOGICAL UNIVERSITY

**MODULE-1**

**Trapezoidal Method (Plane Rotation Method)**

**31. The end projectors of line AB is 60mm apart. A is 20 mm above HP and 30 mm in front of VP and end B is 70mm above HP and 60mm in front of VP. Find the true length of the line.**

32. The end projectors of line AB is 60mm apart. A is 20 mm above HP and 30 mm in front of VP and end B is 70mm above HP and 60mm behind VP. Find the true length of the line.

33. The end projectors of line AB is 60mm apart. A is 15 mm behind VP and 60 mm below HP and end B is 70mm above HP and 30mm in front of VP. Find the true length of the line.

34. A straight line has its mid point at distance of 45mm from both HP and VP. Its true length is 80mm and the top view makes 300 with XY and front view makes 450 with XY. Draw

the projections and locate the traces.

35. Length of the line AB in FV measures 30mm.A is 15mm above HP and 25 mm in front of VP.B is 40mm above HP and the angle of the line with VP is 300. Draw the projections

and find the true inclination with HP.

36. The FV of line AB 50mm long is inclined at 450 to XY, measures 40mm.the end point A is 10mm above HP and 20mm in front of VP. Draw the projections of the line AB and find its inclination with HP and VP. Also mark the traces.

37. The distance between the projectors of A and B is 50mm.the angle of the line in FV is 450.point A is 20mm above HP and B is 70mm in front of VP. Draw the projections and find the true length if the line is inclined at 200 with VP.

**Traces (HT-VT) given Problems**

**38. The front view of a line AB measures 75mm and makes an angle of 500 with XY. The end A is in the HP and the VT of the line is 25mm above HP.**

The line is inclined at 350 to the VP. Draw the projections. Find its true length and true inclination.

39. A line AB is in the third quadrant. The ends A and B are 20mm and 60mm behind VP.

Thedistance between the end projectors is 75mm. the line is inclined at 300 to HP and the HT is 10mm above XY line. Draw the projections.

40. A line AB inclined at 300 to VP has its ends 50mm and 20mm below HP. The length of its front view is 65mm and its VT is 10mm below HP. Draw its projections.

41. AB is straight line whose front view measures 70mm and makes an angle of 300with XY line. The end A is in HP and the VT is 10mm below HP. The straight line is inclined at 350

to VP. Draw its projections.

42. A line AB measuring 100mm has its VT 15mm above HP The end A is 40mm above HP and 30mm in front of VP. The projectors through A and VT are 70mm apart. Draw the

projections.

**Application Problems**

**43. A fan is hung from the centre of the roof of a room of 8*6*3m.the switch is located at a height of 1m above one of the bottom corners. Find the distance between the fan and the switch.**

44. Two mangoes on a tree are 5m and 7m above the ground and on the opposite sides of a vertical wall.

The distance between the mangoes along the ground and parallel to the wall is 6m.if the distance to the mangoes from the vertical wall are 2m and 4m respectively.

Find the actual distance between the mangoes. The thickness of the wall is negligible.

45. A vertical post of height 9m is supported by three guy wires AO, BO and CO. A,B,C are the points on the ground in FV A and B are 20m and 30 m to the left of the post and C is 40m to the right.

In TV, AO is 200 west of south and BO is 350 west of north and CO is 250 north of east. Find the true length of each guy wires and find the true inclinations with the ground.

CLICK HERE FOR MODULE 2 GRAPHICS QUESTIONS.

## No comments: